Unify OpenStage M3EX Plus Specifications download pdf (Page 25)

SHB_PNG-Konfig.fm

A31003-M2000-M103-2-76A9, 07/2014

Alarm and Emergency Call Configuration, Administrator Documentation

3-12

Configuration and activation

Configuration menu

1. Select the Additional Features icon in the main menu.

2. Select Configuration.

3. Enter the five-position service PIN and confirm with OK.

4. Select one of the three operating modes.

5. Select Alarms.

6. Select Alarm Signal.

7. Select Prealarm or Alarming Signal.

8. Change the values of the following parameters:

9. Confirm with Save.

3.2.1.2 [Mode] Activation

Specify here how the selected operating mode (see Section 3.1.3, "Operating mode

(OpenStage M3 Plus and OpenStage M3 Ex Plus only)") is to be activated (applies for all

device types).

If only Automatic is activated, the selected operating mode is activated automatically when the

handset is removed from the charger and deactivated when the handset is replaced in the

charger. If Manual is deactivated, the selected operating mode cannot be activated or

deactivated manually. Both options can be activated.

Procedure:

1. Select the Additional Features icon in the main menu.

2. Select Configuration.

3. Enter the five-position service PIN and confirm with OK.

4. Select one of the three operating modes.

5. Select [Mode] Activation.

Parameters Operating Mode Value Range Standard Value

Warning Signal BM/AM/PNG On/off On

Alarm Signal BM/AM/PNG Alarm 1 ... 5

Prealarm: Alarm 5

Alarming Signal: Alarm 1

Volume BM/AM/PNG 1 ... 5

Prealarm: 3

Alarming Signal: 5

Table 3-9 Parameter – Prealarm/Alarming Signal

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Unify OpenStage M3EX Plus Specifications Page 25