Unify OpenStage M3EX Plus Specifications download pdf (Page 30)

Configuration and activation

A31003-M2000-M103-2-76A9, 07/2014

3-17 Alarm and Emergency Call Configuration, Administrator Documentation

SHB_PNG-Konfig.fm

Configuration menu

Procedure:

1. Select the Additional Features icon in the main menu.

2. Select Configuration.

3. Enter the five-position service PIN and confirm with OK.

4. Select one of the three operating modes.

5. Select Alarm Signal PIN.

6. Change the values of the following parameters:

7. Confirm with Save.

3.2.2 Emergency Call

Emergency numbers can be configured, modified and reset regardless of the alarm

destinations configured in accordance with the operating mode. The emergency number is

dialled by pressing the red alarm key.

Up to three different emergency numbers can be entered. The cyclical processing of all three

emergency numbers is only possible if the base station supports communication of the call

status.

Parameters Value Range Standard Value

PIN On/off On

Please enter the alarm signal PIN (5 digits) 11111

Table 3-14 Parameter – Alarm Signal PIN

Note: A call connection must be established to enable operation of the second and

third emergency call/alarm number when the handset has registered on the HiPath

3000/NextGen/4000. All other systems only support a choice of emergency call or

alarm number.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Unify OpenStage M3EX Plus Specifications Page 30