Unify OpenStage M3EX Plus Specifications download pdf (Page 19)

SHB_PNG-Konfig.fm

A31003-M2000-M103-2-76A9, 07/2014

Alarm and Emergency Call Configuration, Administrator Documentation

3-6

Configuration and activation

Configuration menu

Manual Alarm

You can configure all settings here for the manual alarm, in other words for the alarm triggered

with the red alarm key.

Depending on how the red alarm key is pressed (SP: Shortpress, LP: Longpress), different

alarms are signalled and different alarm destinations are dialled.

For more information on alarm destinations please refer to Chapter 4, "Control ports and alarm

destinations".

Procedure:

1. Select the Additional Features icon in the main menu.

2. Select Configuration.

3. Enter the five-position service PIN and confirm with OK.

4. Select one of the three operating modes.

5. Select Alarms.

6. Select Manual Alarm.

7. Change the values of the following parameters:

8. Confirm with Save.

The red key is assigned for the manual alarm in Alarm Mode and PNG Mode

following activation. The numbers configured under the emergency call (Section

3.2.2, "Emergency Call") are selected if no mode is active. The emergency number

is overwritten by the alarm server with its own emergency number when the Control

Port Basic parameter is entered.

AM/PNG

Parameters Value Range Standard Value

Alarm Key SP On/off On

Alarm Key LP On/off On

Alarm Key locked On/off Off

Alarm Signal SP On/off On

Alarm Signal LP On/off Off

Alarm Destination SP (up to 32 digits) (blank)

Alarm Destination LP (up to 32 digits) (blank)

Table 3-2 Parameter – Manual Alarm

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

Unify OpenStage M3EX Plus Specifications Page 19