Unify OpenStage M3EX Plus Specifications download pdf (Page 20)

Configuration and activation

A31003-M2000-M103-2-76A9, 07/2014

3-7 Alarm and Emergency Call Configuration, Administrator Documentation

SHB_PNG-Konfig.fm

Configuration menu

Wide-ranging solutions are feasible using different configuration options. Example of a silent

alarm when the alarm key is pressed and held down (longpress):

Non Movement Alarm

The Non Movement Alarm can be activated optionally. It is triggered if the sensors identify lack

of movement over a defined configurable period of time.

For more information on alarm destinations please refer to Chapter 4, "Control ports and alarm

destinations".

Procedure:

1. Select the Additional Features icon in the main menu.

2. Select Configuration.

3. Enter the five-position service PIN and confirm with OK.

4. Select one of the three operating modes.

5. Select Alarms.

6. Select Non Movement Alarm.

7. Change the values of the following parameters:

Parameters Sample Value

Alarm Key SP On

Alarm Key LP On

Alarm Key locked Off

Alarm Signal SP On

Alarm Signal LP Off

Alarm Destination SP 6647201

Alarm Destination LP 6647208

Table 3-3 Parameter – Manual Alarm, example

The response time and the prealarm time cannot be added, rather the prealarm time

has to be deducted from the response time. For example, a response time of 90 s

and prealarm time of 15 s means that the prealarm will be triggered after 75 s and

the alarm after 90 s.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

No comments

Unify OpenStage M3EX Plus Specifications Page 20